Honda V65 MAGNA 1985 Manual page 252

FRONT WHEEL/SUSPENSION
Pack all bearing cavities with grease.
Drive in the right bearing first and press the distance
collar into place.
NOTE:
Be certain the distance cotlar is in position
before installing the left bearing.
Drive in the left bearing squarely.
NOTE'
Make sure that the bearings are fully seated
and that the sealed sides are facing out.
Install the speedometer gear retainer in the wheel
hub, aligning the tangs with the slots.
Install the left seal.
Install the right seal. Apply grease to the inner seal
lip and insert the side collar.
15-22
DRIVER
07749-0010000
<::
AlT
ACHMENT. 42
x
47
mm
07746-0010300
PILOT, 15 mm 07746-0040300
RETAINER
SIDE COLLAR
SEAL