Honda V65 MAGNA 1985 Manual page 175

0.5 mm 10.02 in)
0.5 mm 10.02 in}
0.9
mm
(0.04
in)
Using a piston, push
tne
ring into
squarely and measure the end gap.
SERVICE LIMITS:
TOP:
SECOND:
Oil (Side rail):
the cylinder
CRANKSHAFT/PISTON
Measure the piston 0.0.
NOTE:
Take measurements 10 rnm (0.4 in) from the
bottom, and 90° to the piston pin hole.
SERVICE LIMIT: 79.35 mm (3.124 in)
In§peel the cylinder bores for wear or damage.
Measure the cylinder 1.0. at three levels in X and Y
axis.
SERVICE LIMIT: 79.60 mm 13.134 in)
Calculate the piston-to-cylinder dearance.
SERVICE LIMIT: 0.10 mm 10.004 in)
Oversize pistons are available in the following sizes:
0.25,0.50.0.75 lind 1.00 mm.
:.J
12-5