Table of Contents
Advertisement
Tools menu
Click on this to open a drop-down box displaying
nine selectable options: Data View/Trace Window...
Executive Mode, Image Quick Capture...,
On Screen Display, RS-232 Touch Screen
Configuration..., Sync Scaler to Matrix Switcher...,
System Settings..., Reset, and Update Firmware....
• Data View/Trace Window... — Select this to open
a separate window in which the transmit and receive (Tx/Rx)
data between the control
software on the host PC and the Annotator can be viewed in
ASCII format (see figure at right). During data transmission
and receipt, the data tracer window is constantly updated. To
close the window, click Close or the X in the window's top
right corner.
• Executive Mode — Select this to open a secondary drop-down
box, allowing selection between Input Switch/Freeze only,
On, or Off. Select as desired.
• Image Quick Capture — Select this to open a secondary
window. Within that window select the image to capture,
where to save the image to if desired, and/or to print the image (after capture).
Annotator • Annotator Software
6-5
Advertisement
Table of Contents
