How To Use This Manual; Remote Control Panel - Xerox ColorQube 9303 Series Service Manual

How To Use This Manual

Always start with the Service Call Procedures, Section 1. Perform
verify the problem, then follow the directions given.
How to Differentiate Between Machine Variants
The machine will be identified in this manual by the identifiers ColorQube 9301 / 9302 / 9303.
When a procedure, parts list description or other reference is unique amongst different speeds
of machine, the appropriate speed range will be quoted. For example, 38ppm, 45ppm 55ppm.
Any artwork will also be specific.
NOTE: This manual services all configurations of the machine. Ignore references to options
not installed on the machine.
Warnings, Cautions And Notes
A warning is used whenever an operating or maintenance procedure, practice, condi-
tion or statement, if not strictly observed, could result in personal injury.
A translated version of all warnings is in
A caution is used whenever an operation or maintenance procedure, practice, condition or
statement, if not strictly observed, could result in damage to the equipment.
NOTE: A note is used where it is essential to highlight a procedure, practice, condition or state-
ment.
Introduction
How To Use This Manual,
SCP 1 Initial Actions and
WARNING
Translated Warnings.
CAUTION

Remote Control Panel

The ColorQube 9303F machines with system software version 071.XXX.XX.XXX or higher are
equipped with a remote control panel feature to allow remote user access to the UI.
The remote control panel feature enables users the ability to:
• Remotely view the local UI display graphics.
• Operate both hard and soft buttons on the control panel.
The remote control panel on the remote user PC mimics the device control panel enabling the
remote user to operate the device as though they were standing at the machine. Remote
access to Service Mode (diagnostics) is also possible. Refer to
February 2013
iv
GP 47 Remote Diagnostics.
ColorQube® 9303 Family