Figure 111 Vlan Configuration: 802.1Q; Table 76 Vlan Configuration: 802.1Q - ZyXEL Communications Version 1.03 User Manual

Chapter 15 VLAN

Figure 111 VLAN Configuration: 802.1Q

The following table describes the labels in this screen.

Table 76 VLAN Configuration: 802.1Q

LABEL
Device Name
Device IP
VLAN ID
Name
Status
Start VID
End VID
Numbers of
VLAN(s) per
page (Max 100)
Refresh
New
Delete
158
DESCRIPTION
This field displays the descriptive name for the device.
This field displays the IP address of the device.
This field displays the ID of the VLAN.
This field displays the name of the VLAN.
This field displays Active if the VLAN is active and will remain so after the next reset
of the device. This field is DynamicGVRP if the VLAN is active and will remain so
until removed by GVRP. This field is Other if the VLAN is active, but is not
permanent or created by GVRP.
Enter the first VID in the range of VLAN IDs you want to display.
Enter the last VID in the range of VLAN IDs you want to display.
Enter the number of VLAN IDs (between 1 and 100) you want to display at a time.
Click Refresh to update the VID list.
Click New to create a new VLAN. You must enter a VLAN ID and a VLAN Name to
create a new VLAN. The new VLAN and name is displayed in the left-hand column
in this screen.
Click on a VLAN in the left-hand column of this screen and then click the Delete
button to remove it from the VLAN template.
NetAtlas Workgroup User's Guide