Creating A New Multicast Vlan; Table 97 Multicast Configuration: Mvr - ZyXEL Communications Version 1.03 User Manual

Chapter 17 Multicast Configuration
The following table describes the labels in this screen.

Table 97 Multicast Configuration: MVR

LABEL
MVLAN
VLAN
Active
Name
Mode
Source
Port
Receiver
Port
Tagging
Port
802.1p
Add
Modify
Delete
MVR Group
Name
Start
Address
End
Address
Add
Modify
Delete

17.3.4 Creating a New Multicast VLAN

Follow the steps below to create a new multicast VLAN.
1 In the MVR screen, click Add under MVLAN. A screen displays as shown.
186
DESCRIPTION
This table displays the settings the multicast VLAN settings.
This field displays the multicast VLAN ID.
This field displays whether the multicast group is enabled or not.
This field displays the descriptive name for this setting.
This field displays the MVR mode.
This field displays the source port number(s).
This field displays the receiver port number(s).
This field displays the port number(s) that adds the VLAN ID tag to all outgoing frames
transmitted.
This field displays the priority level.
Click Add to add a new entry.
Click Modify to change the settings of the selected MVLAN.
Click Delete to remove the selected MVLAN.
This table displays the MVR group settings.
This field displays the descriptive name for this MVR group.
This field displays the starting IP address of the MVR group.
This field displays the ending IP address of the MVR group.
Click Add to add a new entry.
Click Modify to change the settings of the selected MVR.
Click Delete to remove the selected MVR.
NetAtlas Workgroup User's Guide