Figure 75 Maintenance: Scheduled Device Configuration Restore: Add/Modify
The following table describes the labels in this screen.
Table 50 Maintenance: Scheduled Device Configuration Restore: Add/Modify
LABEL
Device List
Device Name
Device IP
File
Add
Remove
Schedule Time
Schedule Name This field is grayed out unless you are creating a new schedule.
User info for
Windows
Account
Password
Apply
Close
10.6.2 Schedule Content Screen
Use this screen to add one or more switches to a schedule for restoring configuration files. To
open this screen, click Add when you are creating a new schedule or editing an existing one.
NetAtlas Workgroup User's Guide
DESCRIPTION
This field displays the name of each switch in the schedule.
This field displays the corresponding IP address of the switch.
This field displays the full path and name of the configuration file that will be restored
to the switch.
Click this to add one or more switches to the schedule.
Select one or more switches, and click this to remove them from the schedule.
Specify when the configuration files should be restored. This is based on the current
date and time of the computer on which the EMS is running, not the current date and
time of the switch(es).
Type a name to create a new profile. You can use 1-31 alphanumeric characters,
underscores (_), or dashes(-). Spaces are not allowed.
Enter the user name for the Windows account.
Enter the password for the Windows account.
Click this to save your changes.
Click this to discard any unsaved changes and close this screen.
Chapter 10 Maintenance
115