Table of Contents
Advertisement
Chapter 5 View
The following table describes the labels in this screen.
Table 18 View: VLAN Status
LABEL
Device Name
Device IP
VLAN ID
Name
Elapsed Time
Status
Previous Page
Next Page
Current Page
VLANs/Page
Port List
Polling
Close
5.4 Port Status
Follow the steps below to view the port status of a switch.
1 Click View > Port Status.
2 To view the port status of a switch choose a switch from the list located on the left-hand
side of the screen.
62
DESCRIPTION
This field displays the descriptive name of a device.
This field displays the IP address of a device
This field displays the identification number of the VLAN.
This field displays a unique number for identification purposes.
This field displays the time since the VLAN was created.
This field displays Static if the VLAN is active and will remain so after the next reset
of the device. This field displays GVRP if the VLAN is active and will remain so until
removed by GVRP. This field is Other if the VLAN is active, but is not permanent or
created by GVRP.
Click Previous Page to display the previous VLAN ID screen.
Click Next Page to display the next VLAN ID screen.
This field displays the current page number.
Enter a number and click Show Page to display that page.
This field displays the number of VLAN entries to display in one page.
Enter a number (1-99) and click Show Page to display that number of VLAN entries
in a page.
This table displays port VLAN settings. A tagged port is marked T, an untagged port is
marked U and a port not participating in a VLAN is marked -.
The text box displays how often (in seconds) this screen refreshes. You may change
the refresh interval by typing a new number in the text box and then clicking the
Apply button.
Click Close to close the screen.
NetAtlas Workgroup User's Guide
Advertisement
Chapters
Table of Contents
Troubleshooting
