Configuring A New Ospf Area - ZyXEL Communications Version 1.03 User Manual

Table 118 IP Configuration: OSPF (continued)
LABEL
Authentication
Stub Network
Add
Modify
Delete
Virtual-Link
Index
Name
Peer Router ID
Authentication
Key ID
Add
Modify
Delete
Interface
Index
Network
Area ID
Authentication
Key ID
Cost
Priority
Add
Modify
Delete

19.8.4 Configuring a New OSPF Area

Follow the steps below to create a new OSPF area.
1 In the Device Panel list, right-click on a device.
2 Click Configuration > IP Configuration > OSPF.
3 Click Add in the OSPF Configuration pane.
NetAtlas Workgroup User's Guide
DESCRIPTION
This field displays the authentication method used (None, Simple or MD5).
This field displays whether an area is a stub network (Yes) or not (No).
Click Add to create a new OSPF area.
Click Modify to change the settings of the selected OSPF area.
Click Delete to remove the selected OSPF area.
This field displays an index number of an entry.
This field displays a descriptive name of a virtual link.
This field displays the ID (that uses the format of an IP address in dotted decimal
notation) of a peer border router.
This field displays the authentication method used (Same-as-Area, None, Simple or
MD5).
When the Authentication field displays MD5, this field displays the identification
number of the key used.
Click Add to create a new OSPF virtual link.
Click Modify to change the settings of the selected OSPF virtual link.
Click Delete to remove the selected OSPF virtual link.
This field displays the index number for an interface.
This field displays the IP interface information.
This field displays the area ID (that uses the format of an IP address in dotted decimal
notation) of an area to associate the interface to that area.
This field displays the authentication method used (Same-as-Area, None, Simple or
MD5).
When the Authentication field displays MD5, this field displays the identification
number of the key used.
This field displays the interface cost used for calculating the routing table.
This field displays the priority of the interface.
Click Add to create a new OSPF interface.
Click Modify to change the settings of the selected OSPF interface.
Click Delete to remove the selected OSPF interface.
Chapter 19 IP Configuration
213