Filtering; Creating A New Filter; Figure 105 Switch Configuration: Filtering; Table 71 Switch Configuration: Filtering - ZyXEL Communications Version 1.03 User Manual

Chapter 14 Switch Configuration

14.6 Filtering

Filtering means forwarding (not supported on all models) or discarding packets based on the
MAC addresses and VLAN group.
To open the MAC Filtering screen, right-click on the switch in the Device List Panel, and
click Configuration > Switch Configuration > Filtering to display the following screen.

Figure 105 Switch Configuration: Filtering

The following table describes the labels in this screen.

Table 71 Switch Configuration: Filtering

LABEL
Index
Active
Name
MAC Address
VID
Action
Add
Delete

14.6.1 Creating a New Filter

To create a new filter, click Add in the Filtering screen. A configuration screen displays as
shown.
152
DESCRIPTION
This field displays the index number.
This field displays whether the filter is enabled (Yes) or not (No).
This field displays the descriptive name for this filter.
This field displays the MAC address of a device whose traffic is forwarded or blocked.
This field displays the ID of the VLAN group to which the MAC address belongs.
This field displays the action on the matching packets.
Click Add to create a new filter.
Click Delete to remove the selected filter.
NetAtlas Workgroup User's Guide