Ospf Status; Figure 36 View: Ip Application Status: Vrrp Status; Table 27 View: Ip Application Status: Vrrp Status - ZyXEL Communications Version 1.03 User Manual

Figure 36 View: IP Application Status: VRRP Status

The following table describes the labels in this screen.

Table 27 View: IP Application Status: VRRP Status

LABEL
Device Name
Device IP
Index
Network
VRID
VR Status
Uplink Status
Polling
Close

5.8.5 OSPF Status

Follow the steps below to view the OSPF status of a selected device.
NetAtlas Workgroup User's Guide
DESCRIPTION
This field displays the descriptive name of a device.
This field displays the IP address of a device
This field displays the index number of a rule.
This field displays the IP address and the subnet mask bits of an IP routing domain
that is associated to a virtual router.
This field displays the ID number of the virtual router.
This field displays the status of the virtual router.
This field is Master indicating that this switch functions as the master router.
This field is Backup indicating that this switch functions as a backup router.
This field displays Init when this switch is initiating the VRRP protocol or when the
Uplink Status field displays Dead.
This field displays the status of the link between this switch and the uplink gateway.
This field is Alive indicating that the link between this switch and the uplink gateway is
up. Otherwise, this field is Dead.
This field displays Probe when this switch is check for the link state.
The text box displays how often (in seconds) this screen refreshes. You may change
the refresh interval by typing a new number in the text box and then clicking Apply.
Click Close to close this screen.
Chapter 5 View
73