Chapter 18 Configuration
Figure 138 RMON Configuration: History Config.
The following table describes the labels in this screen.
Table 99 RMON Configuration: History Config.
LABEL
Index
Active
Data Source
Bucket
Requested
Bucket Granted
Interval (sec)
Owner
New
Delete
Modify
18.2.1 Configuring an RMON History
To configure a new RMON history, click New in the History Config. screen.
To change the settings of a selected RMON history, click Modify in the History Config.
screen.
192
DESCRIPTION
This field displays the configuration index number.
This field displays Yes if the history setting is enabled. Otherwise, it displays No.
This is the port of the IP DSLAM that the EMS will poll for data.
This field displays the number of data samplings the network manager requests the
probe to store.
This field displays the number of data samplings the probe allows to stores.
This field displays the time between data samplings.
This field displays the application that creates this entry.
Click this to add a new history configuration.
Click this to remove the selected history configuration.
Click this to change the setting of the selected history configuration.
NetAtlas Workgroup User's Guide