Figure 142 Rmon Configuration: Alarm Config; Table 103 Rmon Configuration: Alarm Config - ZyXEL Communications Version 1.03 User Manual

Chapter 18 Configuration

Figure 142 RMON Configuration: Alarm Config.

The following table describes the labels in this screen.

Table 103 RMON Configuration: Alarm Config.

LABEL
Index
Active
Interval (sec)
Sample Type
Startup Alarm
Port
Variable
Owner
New
Delete
Modify
Show Log
RMON Alarm
Parameters
Item
Threshold
Index
Active
196
DESCRIPTION
This field displays the alarm configuration index number.
This field displays Yes if an alarm configuration is enabled. Otherwise, it displays
No.
This field displays the time interval (in seconds) between data samplings.
This field displays the method of obtaining the sample value (Absolute or Delta).
This field displays the alarm type (Rising, Falling, R/F) that can be sent when this
alarm is first activated.
This field displays the port number.
This field displays the name of the MIB field whose data is to be sampled.
This field displays the name of the application that creates this entry.
Click this to add a new history configuration.
Click this to remove the selected history configuration.
Click this to change the setting of the selected history configuration.
Click this to view logs.
This field indicates the type of alarm.
This field displays the threshold setting for the type of alarm. The meaning depends
on the type of alarm.
This field displays the event index number.
This field display whether an alarm is enabled (Yes) or not (No).
NetAtlas Workgroup User's Guide