Ip Multicast; Figure 162 Ip Configuration: Ip Multicast; Table 124 Ip Configuration: Ip Multicast - ZyXEL Communications Version 1.03 User Manual

Chapter 19 IP Configuration

19.10 IP Multicast

You can configure the switch to untag (remove the VLAN tags from) IP multicast packets that
the switch forwards. This allows the switch to send packets to Ethernet devices that are not
VLAN-aware.
To display the IP Multicast screen, right-click on a switch in the Device Panel list and click
Configuration > IP Configuration > IP Multicast.

Figure 162 IP Configuration: IP Multicast

The following table describes the labels in this screen.

Table 124 IP Configuration: IP Multicast

LABEL
Port
IP Multicast Egress
Untag Vlan ID
Apply
220
DESCRIPTION
This read-only field displays the port number.
The switch removes the VLAN tag from IP multicast packets belonging to the
specified VLAN before transmission on this port.
Enter a VLAN group ID in this field. Enter 0 to set the switch not to remove any
VLAN tags from the packets.
Click Apply to save the settings.
NetAtlas Workgroup User's Guide