Mvr; Figure 131 Multicast Configuration: Multicast Settings: View Profile; Table 96 Multicast Configuration: Multicast Settings: View Profile - ZyXEL Communications Version 1.03 User Manual

Chapter 17 Multicast Configuration

Figure 131 Multicast Configuration: Multicast Settings: View Profile

The following table describes the labels in this screen.

Table 96 Multicast Configuration: Multicast Settings: View Profile

LABEL
Profile Name
Start Address
End Address
Close

17.3 MVR

Multicast VLAN Registration (MVR) is designed for applications (such as Media-on-Demand
(MoD)) that use multicast traffic across a service provider network.
MVR allows one single multicast VLAN to be shared among different subscriber VLANs on
the network. While isolated in different subscriber VLANs, connected devices can subscriber
to and unsubscribe from the multicast stream in the multicast VLAN. This improves
bandwidth utilization with reduced multicast traffic in the subscriber VLANs and simplifies
multicast group management.
You must enable IGMP snooping to use MVR. However, MVR only responds to IGMP join
and leave control messages from multicast groups that are configured under MVR. Join and
leave reports from other multicast groups are managed by IGMP snooping.
184
DESCRIPTION
Select a profile name from the drop-down list box.
This field displays the starting multicast IP address for a range of multicast IP
addresses to which you want this IGMP filter profile to allow access.
This field displays the ending multicast IP address for a range of IP addresses to which
you want this IGMP filter profile to allow access.
Click Close to close this screen.
NetAtlas Workgroup User's Guide