Configuring A Static Route; Figure 147 Routing Configuration: Static Route: Add; Table 106 Routing Configuration: Static Route; Table 107 Routing Configuration: Static Route: Add Or Modify - ZyXEL Communications Version 1.03 User Manual

Chapter 19 IP Configuration
The following table describes the labels in the summary table.

Table 106 Routing Configuration: Static Route

LABEL
Index
Name
Active
Destination Address This field displays the IP network address of the final destination.
Subnet Mask
Gateway Address
Metric
Add
Modify
Delete

19.1.1 Configuring a Static Route

Click the Add button or select a static route and click the Modify button in the Routing
Configuration screen to display the following screen.

Figure 147 Routing Configuration: Static Route: Add

The following table describes the labels in this screen.

Table 107 Routing Configuration: Static Route: Add or Modify

LABEL
Active
Name
Destination
IP Address
IP Subnet
Mask
200
DESCRIPTION
This field displays the index number of the route.
This field displays the descriptive name for this route. This is for identification
purposes only.
This field displays Yes when the static route is activated and No when is it
deactivated.
This field displays the subnet mask for this destination.
This field displays the IP address of the gateway. The gateway is an immediate
neighbor of your switch that will forward the packet to the destination.
This field displays the cost of transmission for routing purposes.
Click the Add button to create a new static route.
Select the rule(s) that you want to change and click the Modify button.
Select the rule(s) that you want to remove in the Delete column, and then click
the Delete button.
DESCRIPTION
This field allows you to activate/deactivate this static route.
Enter a descriptive name for this route. This is for identification purposes only.
This parameter specifies the IP network address of the final destination. Routing is
always based on network number. If you need to specify a route to a single host, use a
subnet mask of 255.255.255.255 in the subnet mask field to force the network number
to be identical to the host ID.
Enter the subnet mask for this destination.
NetAtlas Workgroup User's Guide