Figure 40 Template: Vlan Template; Table 31 Template: Vlan - ZyXEL Communications Version 1.03 User Manual

Chapter 6 Template

Figure 40 Template: VLAN Template

The following table describes the labels in this screen.

Table 31 Template: VLAN

LABEL
Device Type
VLAN Identity
VLAN ID
VLAN Name Enter a descriptive name for identification purposes.
Egress Ports
Forbidden Ports
Untag Ports
New
Delete
78
DESCRIPTION
Select a device for which you want to configure a VLAN template.
Enter a unique number to identify the VLAN.
A port that is in the egress list in a VLAN. Only select this if the subscriber's DSL
modem or router supports IEEE 802.1Q VLAN.
Select the ports which you want to be egress ports from the list provided.
A port that is blocked from joining a VLAN group. No frames are transmitted through
this port.
A forbidden port cannot be an egress port and cannot add tags to outgoing traffic.
Select the ports which you want to be forbidden ports from the list provided.
A port that does not tag all outgoing frames transmitted.
An egress port can be untagged.
Select the ports which you want to be untagged ports from the list provided.
Click New to create a new VLAN. You must enter a VLAN ID and a VLAN Name to
create a new VLAN. The new VLAN and name is displayed in the left-hand column
in this screen.
Click on a VLAN in the left-hand column of this screen and then click the Delete
button to remove it from the VLAN template.
NetAtlas Workgroup User's Guide