Figure 156 Ip Configuration: Ospf; Table 118 Ip Configuration: Ospf - ZyXEL Communications Version 1.03 User Manual

Chapter 19 IP Configuration

Figure 156 IP Configuration: OSPF

The follow table describes the related labels in this screen.

Table 118 IP Configuration: OSPF

LABEL
Active
Router ID
Redistribute
Route
Active
Type
Metric Value
Apply
OSPF
Configuration
Index
Name
Area ID
212
DESCRIPTION
OSPF is disabled by default. Select this option to enable it.
Router ID uniquely identifies the switch in an OSPF. Enter a unique ID (that uses the
format of an IP address in dotted decimal notation) for the switch.
Route redistribution allows your switch to import and translate external routes learned
through other routing protocols (RIP and Static) into the OSPF network transparently.
Select this option to activate route redistribution for routes learnt through the selected
protocol.
Select 1 for routing protocols (such as RIP) whose external metrics are directly
comparable to the internal OSPF cost. When selecting a path, the internal OSPF cost
is added to the AB boundary router to the external metrics.
Select 2 for routing protocols whose external metrics are not comparable to the OSPF
cost. In this case, the external cost of the AB boundary router is used in path decision
to a destination.
Enter a route cost (between 0 and 16777214).
Click Apply to save the changes.
This field displays the index number of an area.
This field displays the descriptive name of an area.
This field displays the area ID (that uses the format of an IP address in dotted decimal
notation) that uniquely identifies an area.
An area ID of 0.0.0.0 indicates the backbone.
NetAtlas Workgroup User's Guide