ZyXEL Communications Version 1.03 User Manual page 47

Ethernet switch manager
Table of Contents

Advertisement

Table 10 EMS Navigation Panel Sub-link Descriptions (continued)
LABEL
802.1d
Multicast Status
Ethernet Status
IP Application
Status
Interface Status
Firmware Version
Template
VLAN Template
IGMP Filtering
Profile Template
Multicast Template
Provisioning
IGMP Filtering
Provisioning
Performance
Interface
RMON
Fault
Event Log
Loopback Test
Ping and Traceroute Select this to test connections using a ping or traceroute test.
Maintenance
Firmware Upgrade
Device Reset
NE Configuration
Backup and Restore
Load Factory
Default
Scheduled NE
Config Backup
Scheduled NE
Config Restore
Scheduled FW
Upgrade
Tool
Telnet
Web Access
NetAtlas Workgroup User's Guide
DESCRIPTION
Select this to view the MAC addresses (and types) of devices attached to
what ports and VLAN IDs or view the MAC addresses – IP address
resolution table.
Select this to view the multicast traffic status of a device.
Select this view Ethernet port statistics.
Select this to view IP routing domain status.
Select this to view IP routing interface status.
Select this to view the firmware versions of the managed devices.
Select this to configure a VLAN template for upload to multiple devices.
Select this to configure an IGMP filter template for upload to multiple
devices.
Select this to configure a multicast template for upload to multiple devices.
Select this to apply IGMP filtering templates.
Select this to configure interface performance graphs and tables.
Select this to view RMON Ethernet and history statistics.
Select this to configure an alarm filter.
Select this to perform a loopback test.
Select this to perform a device firmware upgrade.
Select this to reboot a device.
Select this to back up or restore device configuration.
Select this to reset a device back to the factory default settings.
Select this when you want to configure a schedule to back up a switch
configuration file.
Select this when you want to configure a schedule to restore a switch
configuration file.
Select this when you want to configure a schedule to perform firmware
upgrade on a switch.
This link takes you to a screen where you can access a device Telnet
service.
This link takes you to a screen where you can access a device Web
configurator.
Chapter 3 Switch Manager
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netatlas workgroup

Table of Contents