Figure 11 Admin: SNMP Operation Mode
The following table describes the fields in this screen.
Table 7 Admin: SNMP Operation
LABEL
Client Sends SNMP
Operation via Server
Client Sends SNMP
Operation itself
OK
Cancel
2.5 Accessing the Switch Manager Screen
To display the EMS main screen, click on the device icon in the main screen.
The EMS polls for all the available switches. Select a device icon to display a graphic of the
switch in the Device Panel. You can only display one switch in the Device Panel at one time.
NetAtlas Workgroup User's Guide
DESCRIPTION
Select this option to set the EMS remote client computer(s) to send SNMP
messages to managed ZyXEL devices through the EMS server.
Select this option if the remote client computer(s) is not in the same subnet as
the managed devices.
Select this option to allow the EMS remote client computer(s) to send SNMP
messages directly to managed ZyXEL devices.
Select this option if the remote client computer(s) is in the same subnet as the
managed devices.
Click OK to save changes to the EMS.
Click Cancel to discard the change and close the screen.
Chapter 2 Main EMS Screen
39