Configuring An Ip Interface; Figure 99 System Configuration: Ip Setup: Add; Table 63 System Configuration: Ip Setup: Add - ZyXEL Communications Version 1.03 User Manual

Table 62 System Configuration: IP Setup (continued)
LABEL
Out-of-band Management IP Address
Use these fields to set the settings for the out-of-band management port.
IP Address
IP Subnet
Mask
Default
Gateway
Apply
IP Interface
Index
IP Address
Subnet Mask
VID
Default
Gateway
Manageable
Add
Modify
Delete

13.8.1 Configuring an IP Interface

To create a new IP interface, click Add in the IP Setup screen.

Figure 99 System Configuration: IP Setup: Add

The following table describes the labels in this screen.

Table 63 System Configuration: IP Setup: Add

LABEL
IP Address
IP Subnet Mask
VID
NetAtlas Workgroup User's Guide
DESCRIPTION
Enter the out-of-band management IP address of your switch in dotted decimal
notation. For example, 192.168.0.1.
Enter the IP subnet mask of your switch in dotted decimal notation for example
255.255.255.0.
Enter the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.0.254
Click Apply to save the settings for this part of the screen.
This field displays the index number of an entry.
This field displays IP address of the switch in the IP domain.
This field displays the subnet mask of the switch in the IP domain.
This field displays the VLAN identification number of the IP domain on the switch.
This field displays the IP address of the gateway device.
Click Add to configure a new IP interface.
Click Modify to change the settings of a selected IP interface.
Click Delete to remove a selected IP interface.
DESCRIPTION
Enter the IP address of your switch in dotted decimal notation for example
192.168.1.1. This is the IP address of the switch in an IP routing domain.
Enter the IP subnet mask of an IP routing domain in dotted decimal notation. For
example, 255.255.255.0.
Enter the VLAN identification number to which the IP address belongs.
Chapter 13 System Configuration
141