Configuring An Rmon Alarm; Figure 143 Rmon Configuration: Alarm Config.: New; Figure 144 Rmon Configuration: Alarm Config.: New: Browse; Table 104 Rmon Configuration, Alarm Config., New - ZyXEL Communications Version 1.03 User Manual

Table 103 RMON Configuration: Alarm Config. (continued)
LABEL
Type
Community
Description
Owner

18.4.1 Configuring an RMON Alarm

To create a new RMON alarm, click New in the Alarm Config. screen.
To change the settings of a selected RMON alarm, click Modify in the Alarm Config. screen.

Figure 143 RMON Configuration: Alarm Config.: New

The following table describes the labels in this screen.

Table 104 RMON Configuration, Alarm Config., New

LABEL
Active
Variable
Interval
NetAtlas Workgroup User's Guide
DESCRIPTION
This field displays the alarm type (log, snmp-trap or log&trap).
This field displays the community (or password).
This field displays a description of the alarm.
This field displays the name of the application that creates this entry.
DESCRIPTION
Select Yes to enable this alarm. Otherwise, select No.
Click Browse to select the variable whose data is sampled. The following screen
appears.

Figure 144 RMON Configuration: Alarm Config.: New: Browse

Select the type, port, and variable whose data should be sampled, and click OK.
Specify the time between data samplings.
Chapter 18 Configuration
197