Chapter 18 Configuration
Table 104 RMON Configuration, Alarm Config., New (continued)
LABEL
Sample Type
Startup Alarm
Rising
Condition
Rising
Threshold
Rising Event
Falling
Condition
Falling
Threshold
Falling Event
Owner
OK
Cancel
18.4.2 RMON Alarm Event Log
Use this screen to display alarm logs. To open this screen, click Configuration, RMON
Configuration, Alarm Config, Show Log.
Figure 145 RMON Configuration: Alarm Config.: Show Log
The following table describes the labels in this screen.
Table 105 RMON Configuration: Alarm Config.: Show Log
LABEL
No.
Event Index
Log Index
Time
Sample Type
Close
198
DESCRIPTION
Select the method of obtaining the sample value. Choices are Absolute Value and
Delta Value.
Select the startup alarm type (Rising Alarm, Falling Alarm, Rising Or Falling
Alarm).
Specify a rising threshold (between 0 and 2147483647). When a value that is
greater or equal to this threshold, the probe triggers an alarm.
Click Browse to select an index number of a rising event.
Specify the falling threshold (between 0 and 2147483647). When a value that is
smaller or equal to this threshold, the probe triggers an alarm.
Click Browse to select an index number of a falling event.
Enter a descriptive name of the application that creates this entry. You can use 1-31
printable ASCII characters. Spaces are allowed.
Click this to save the settings and close this screen.
Click this to discard all changes and close the screen.
DESCRIPTION
This field displays an index number.
This field displays an event index number.
This field displays a log index number.
This field displays the time a log was generated.
This field displays the method of obtaining the sample value.
Click this to close this screen.
NetAtlas Workgroup User's Guide