Configuring An 802.11Q Vlan; Figure 112 Vlan Configuration: 802.1Q: New Or Modify; Table 77 Vlan Configuration: 802.1Q: Modify - ZyXEL Communications Version 1.03 User Manual

Table 76 VLAN Configuration: 802.1Q (continued)
LABEL
Modify
Load Template
Port List
Close

15.2.1 Configuring an 802.11Q VLAN

Ports are assigned membership in a VLAN by associating a VLAN ID with the ports.
In the VLAN Configuration screen, click New or Modify to display the setup screen.

Figure 112 VLAN Configuration: 802.1Q: New or Modify

The following table describes the labels in this screen.

Table 77 VLAN Configuration: 802.1Q: Modify

LABEL
VLAN Identity
Active
VLAN ID
NetAtlas Workgroup User's Guide
DESCRIPTION
Click on a VLAN in the left-hand column of this screen. Change the VLAN ID, VLAN
Name or change the configuration of the egress, forbidden and untagged ports.
Click the Modify button to save the changes.
Use a VLAN template to overwrite existing selected VLANs. Select one or more
VLANs and click the Load Template button. See
information.
Click on a port in the Egress Ports list to add the selected port to the port list. If a
port is not selected from any of the three port lists, then it is a normal tagged port.
Refer to Table 77 on page 159
Click Close to close the screen.
DESCRIPTION
Select Active to enable this VLAN.
This field displays a unique number to identify the VLAN.
Section 6.2 on page 77
for the VLAN port type descriptions.
Chapter 15 VLAN
for more
159