Configuring 802.1X - Zywall; Configuring 802.1X - Prestige; Figure 51 Configuration > Wlan > 802.1X - Zywall; Table 23 Configuration > Wlan > 802.1X - Zywall - ZyXEL Communications Vantage CNM User Manual

6.6.1

Configuring 802.1x - ZyWALL

Select a ZyWALL device and then click Configuration > WLAN > 802.1x. The screen
appears as shown next.
Figure 51 Configuration > WLAN > 802.1x - ZyWALL
The following table describes the fields in this screen
Table 23 Configuration > WLAN > 802.1x – ZyWALL
LABEL
Authentication
Control.
Reauthentication
Timer
Apply
Reset

6.6.2 Configuring 802.1x - Prestige

Select a Prestige device and then click Configuration > WLAN > 802.1x. The screen appears
as shown next.
Chapter 6 Configuration > WLAN
DESCRIPTION
Select Authentication Required to authenticate all wireless clients before they
can access the wired network.
Select No Authentication Required to allow all wireless clients to access your
wired network without authentication.
Select No Access to deny all wireless clients access to your wired network
Specify the time interval between the RADIUS server's authentication checks of
wireless users connected to the network.
This field is activated only when you select Authentication Required in the
Authentication Type field.
Click Apply to save your changes back to the ZyXEL device.
Click Reset to begin configuring this screen afresh.
Vantage CNM User's Guide
100