Figure 37 View: Ip Application Status: Ospf Status; Table 28 View: Ip Application Status: Ospf Status - ZyXEL Communications Version 1.03 User Manual

Chapter 5 View
1 Click View > IP Application Status.
2 Select a switch from the list located on the left-hand side of the screen.
3 Click the OSPF Status tab.

Figure 37 View: IP Application Status: OSPF Status

The following table describes the labels in this screen.

Table 28 View: IP Application Status: OSPF Status

LABEL
Device Name
Device IP
OSPF
Interface
Neighbor
Neighbor ID
Pri
State
Dead Time
Address
Interface
RXmtL
RqstL
DBsmL
74
DESCRIPTION
This field displays the descriptive name of a device.
This field displays the IP address of a device
This field displays whether the OSPF feature is active or not.
This field displays the OSPF interface status on the switch.
This field displays the router ID of the neighbor.
This field displays the priority of the neighbor. This number is used in the designated
router election.
This field displays the state of the neighbor (backup or DR (designated router)).
This field displays the dead time in seconds.
This field displays the IP address of a neighbor.
This field displays the MAC address of a device.
This field displays the count of LS (Link State) retransmits.
This field displays the count of LS (Link State) requests.
This field displays the count of DB (Database) summary.
NetAtlas Workgroup User's Guide