Priority Queue - ZyXEL Communications Version 1.03 User Manual

Ethernet switch manager
Table of Contents

Advertisement

Table 64 Switch Configuration: Switch Setup (continued)
LABEL
GVRP
802.1q Port Isolation
802.1q Ingress Check
VLAN Stacking
Bridge control protocol
transparency
Apply

14.2 Priority Queue

Queuing is used to help solve performance degradation when there is network congestion.
Configure queuing algorithms for outgoing traffic in the Switch Setup screen. Queuing
algorithms allow switches to maintain separate queues for packets from each individual source
or flow and prevent a source from monopolizing the bandwidth.
Follow the steps below to configure priority queuing.
To open this screen, right-click on the switch in the Device List Panel, and click
Configuration > Switch Configuration > Priority Queue to display the following screen.
NetAtlas Workgroup User's Guide
DESCRIPTION
Select the check box to permit VLANs groups beyond the local switch on
this port. GVRP (GARP VLAN Registration Protocol) is a registration
protocol that defines a way for switches to register necessary VLAN
members on ports across the network.
Port Isolation allows each port to communicate with the CPU port, uplink
ports and stacking ports (if available) but not communicate with each
other. This option is the most limiting but also the most secure.
Select this check box to set the switch to discard incoming frames for
VLANs that do not have this port as a member
Select the check box to enable VLAN stacking.
In the SP TPID drop-down list box, select a standard Ethernet type code
to identify the frame and indicate whether the frame carries IEEE 802.1Q
tag information. Or select Others and then enter a four-digit hexadecimal
number from 0x0000 to 0xFFFF. 0x denotes a hexadecimal number. It
does not have to be typed in the Others field.
Select the check box to allow the switch to handle bridging control
protocols (STP for example). You also need to define how to treat a
BPDU in the Port Setup screen.
Click Apply to save your changes back to the switch.
Chapter 14 Switch Configuration
145

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netatlas workgroup

Table of Contents