Configuring A Multicast Template; Figure 44 Template: New Multicast; Table 35 Template: New Multicast - ZyXEL Communications Version 1.03 User Manual

Table 34 Template: Multicast (continued)
LABEL
Group Limit
Max. Group
Number
IGMP Filtering
IGMP Querier
Mode
Close

6.4.1 Configuring a Multicast Template

To create a new multicast template, click New in the Multicast Template screen.

Figure 44 Template: New Multicast

The following table describes the labels in this screen.

Table 35 Template: New Multicast

LABEL
Profile Name
Port
Immed. Leave
NetAtlas Workgroup User's Guide
DESCRIPTION
This field shows whether the switch limit the number of multicast groups this port is
allowed to join or not.
Once a port is registered in the specified number of multicast groups, any new IGMP
join report frame(s) is dropped on this port.
This field displays the number of multicast groups this port is allowed to join.
This field displays the name of the IGMP filtering profile to use for this port.
This field displays the IGMP querier mode for this port.
Click Close to close this screen.
DESCRIPTION
Enter a descriptive name for the new multicast template.
This field displays the port number.
Double-click this field and specify whether the switch is to remove this port from the
multicast tree when an IGMP version 2 leave message is received on this port.
Select True from the drop-down list box to activate the immediate leave feature.
Select False to disable this feature.
Chapter 6 Template
83