Configuration Save; Figure 18 Configuration Save - ZyXEL Communications Version 1.03 User Manual

Chapter 3 Switch Manager

3.10 Configuration Save

You must save the current configuration in the EMS to the selected switch(es) to make the
changes take effect.
If an administrator is currently logged into the device via the console port or the
CLI (Command Line Interface), you cannot save the device settings from the
EMS.
Do NOT turn off the switch during the updating process, as it may corrupt the
firmware and make your switch unusable.
1 To save the current switch configuration, select and right-click on the switch icon in the
Device List Panel.
2 Click Configuration Save.
3 Choose a switch from the list in the screen. You can select more than one switch by
pressing [CTRL] and click at the same time. Note that switches that are online are
displayed in green. Off line switches are displayed in red.

Figure 18 Configuration Save

4 Click Apply to save the current configuration. All settings configured on the EMS will
be saved to the selected switch(es).
5 A screen displays showing the configuration save result. Click Done to close the screen.
50
NetAtlas Workgroup User's Guide