F11 Display Resolution Setting - SMC Networks D-MH1AD Series Operation Manual

■[F11] Display resolution setting
This function is used to change the number of display digits.
The flicker of the display can be reduced.
<How to operate>
Press the UP or DOWN button in function selection mode to display [F11].
Display resolution setting
Press the UP or DOWN button to select the resolution.
Press the SET button to save the setting.
: This setting is intended for measurement indicated values in the main display and does not affect set values, peak or bottom value,
or difference indicated value.
Press the SET button.
[F11] Display resolution setting completed
-48-
Moves to the setting of resolution.
Returns to function selection mode.
No.D-※S-OMA1021