F10 Sub Display Setting - SMC Networks D-MH1AD Series Operation Manual

■[F10] Sub display setting
This function is used to change the display method of the sub display.
The details of the settings are described on page
<How to operate>
Press the UP or DOWN button in function selection mode to display [F10].
Sub display setting
Press the UP or DOWN button to select the sub display method.
When [dUAL] 2 value display is selected
Press the SET button to save the setting.
Moves to the display items of the sub
display (Left).
Setting of sub display (left)
Set the sub display (left) from the selection
list on page 46.
Press the SET button
to save the setting.
Changes to the
setting on the sub
display (right).
Setting of sub display (right)
Set the sub display (right) from the selection
list on page 46.
Press the SET button
to save the setting.
Returns to function
selection mode.
46 onward.
Press the SET button.
Setting of the line name input
Set the line name input.
(Refer to page 47)
[F10] Sub display setup completed
-45-
Moves to the setting of the sub display.
[LinE] When character string
display is selected
Press the SET button to
save the setting.
Moves to the setting of line
name.
Press the SET
button to save the
setting.
Returns to function
selection mode.
[Std] When the
standard is
selected, or
[oFF] When
display OFF is
selected
Press the SET
button to save the
setting.
Returns to function
selection mode.
No.D-※S-OMA1021