F7 Digital Filter Setting - SMC Networks D-MH1AD Series Operation Manual

■[F 7] Digital filter setting
The digital filter can be selected.
Output chattering or display flicker in measurement mode can be reduced by setting the digital filter.
<How to operate>
Press the UP or DOWN button in function selection mode to display [F 7].
Digital filter setting
Press the UP or DOWN button to select the digital filter.
Press the SET button to save the setting.
1: Each set value is a guideline for 90% response time.
2: Both the switch output and indicated value are affected. If only switch output needs to be affected, select the delay time setting
(page 41).
Press the SET button.
[F 7] Digital filter setup completed
-44-
Moves to the setting of digital filter.
Returns to function selection mode.
No.D-※S-OMA1021