F90 Setting Of All Functions - SMC Networks D-MH1AD Series Operation Manual

■[F90] Setting of all functions
All functions can be set in turn.
<How to operate>
Press the UP or DOWN button in function selection mode to display [F90].
Setting of all functions
Press the UP or DOWN button to select all functions.
[oFF] When (Not used)
is selected
Press the SET button
to save the setting.
Returns to function
selection mode.
: Setting of each function
Every time the SET button is pressed, the display moves on to the next function in the same order as "Setting of each function" on
page 53
Change the settings using the UP and DOWN buttons.
For details of how to set each function, refer to the relevant function setting section in this manual.
: Press the SET button for 2 seconds or longer to return from any setting item to measurement mode.
: Function settings made before returning to measurement mode are stored.
Press the SET button.
[on] When (Used) is selected
Press the SET button to save the setting.
[oFF] After returning to (Not used),
press the SET button to save the setting.
[F90] Setting of all functions completed
-52-
Moves to the setting of all functions.
Setting of functions 
Returns to function
selection mode.
No.D-※S-OMA1021