F11 Display Resolution Setting - SMC Networks ISE70 AB Series Operation Manual

■[F11] Display resolution setting
This function is to change the pressure display resolution.
The flicker of the display can be reduced.
<Operation>
Press the UP or DOWN button in function selection mode to display [F11].
Display resolution setting
Press the UP or DOWN button to select the display resolution.
Press the SET button to set.
: It may not be possible to change the resolution depending on the unit of pressure selected.
The units that allow display resolution to be selected are [MPa], [kPa], [kgf/cm
(The units [kgf/cm 2 ], [bar] and [psi] can only be set when using a product with units selection function.)
Page 26 [F 0] Display units and switch output specifications function
Press the SET button.
[F11] Display resolution setting completed
-42-
Move on to display resolution setting.
Return to function selection mode.
2 ], [bar] and [psi].
No.PS※※-OMW0002-D