SMC Networks D-MH1AD Series Operation Manual page 32

[3 Step Setting [Simple Setting [Function [Other Settings]
Mode] Mode] Selection Mode]
•Key-lock
(Refer to page 59)
Set 1 set value. Set all the set values Select the settings of
(Refer to page 34) and delay time. each function.
(Refer to page 35) (Refer to page 36)
: The output continues to operate during setting.
: If the button is not operated for a certain period of time during setting, the display will flash. (This is intended to prevent failure to
complete the setting due to leaving in the middle of setting.)
: A setting in 3 step setting mode, simple setting mode, or function selection mode is applied to each of the modes.
-31-
No.D-※S-OMA1021