F11 Display Resolution Setting - SMC Networks ZSE20B-L Operation Manual

■[F11] Display resolution setting
This function is to change the pressure display resolution.
The flicker of the display can be reduced.
<Operation>
Press the or
Display resolution setting
Press the or
Press the
∗: It may not be possible to change the resolution depending on the unit of pressure selected.
The units that allow display resolution to be selected are [MPa], [kPa(ZSE20B(F) only)], [kgf/cm
[psi] and [inHg]
2
(The units [kgf/cm ], [bar], [psi] and [inHg] can only be set when using a product with units selection
function.)
Page 30 [F 0] Display units, switch output specifications and diagnostic information selection function
button in function selection mode to display [F11].
Press the button.
button to select the display resolution.
button to set.
[F11] Display resolution setting completed
Move on to display resolution setting.
Return to function selection mode.
-47-
2
], [bar],
No.PS※※-OMV0006-D