Table of Contents
Advertisement
Troubleshooting
When any failure occurs with this product, the following chart can be used to identify the cause of the failure.
If a cause applicable to the troubles cannot be identified and normal operation is recovered by replacement
with a new product, this indicates that the product itself is faulty. The product may fail depending on the
operating environment (network configuration, etc.). In that case, please consult SMC for solutions.
The
analogue ASW does not
operate normally
Yes
No
Is the actuator
applicable?
The analogue voltage
is not output
Analogue output error
(The specifications are
not met)
Refer to
Problem No. SW-3
-64-
Misapplication
Refer to
Problem No. SW-1
Refer to
Problem No. SW-2
No.D-※S-OMA1021
Advertisement
Table of Contents
