SMC Networks D-MH1AD Series Operation Manual page 54

●Setting of each function
Order
1 Setting of switch output NPN or PNP specification changeover
2 Setting of switch output. N.O. or N.C. specification changeover
3 Setting of analogue display inversion
4 Setting of output setting mode
5 Setting of the output point (SP1)
6 Setting of the ON width (W_1)
7 Setting of the hysteresis (H_1)
8 Setting of the delay time (dt)
9 Setting of the display colour (CoL)
10 Setting of the output point (SP2)
11 Setting of the ON width (W_2)
12 Setting of the hysteresis (H_2)
13 Setting of the delay time (dt)
14 Setting of the display colour (CoL)
15 Setting of the output point (SP3)
16 Setting of the ON width (W_3)
17 Setting of the hysteresis (H_3)
18 Setting of the delay time (dt)
19 Setting of the display colour (CoL)
20 Digital filter setting
21 Sub display setting
22 Display resolution setting
23 Power saving mode setting
24 Security code input setting
: Press the SET button for 2 seconds or longer to return from any setting item to measurement mode.
: Function settings made before returning to measurement mode are stored.
Function





-53-
No.D-※S-OMA1021