Initial Settings - SMC Networks D-MH1AD Series Operation Manual

Initial Settings

Set the output specifications, including the NPN or PNP setting, and select the setting mode.
[F 0] Displays the switch output specification and setting mode functions.
Setting of switch output NPN or PNP specification changeover
The switch output of this product can be switched to NPN or PNP output in accordance with
the configuration of your equipment.
Press the UP or DOWN button to select the switch output specification.
Press the SET button to save the setting.
Setting of switch output. N.O. or N.C. specification changeover
The output specification can be changed to normally open (N.O. type) or normally closed (N.C. type).
Press the UP or DOWN button to select a switch output specification.
Press the SET button to save the setting.
Measurement mode
Press the SET button.
-32-
Press the SET button for 3 seconds or longer but
less than 5 seconds.
Moves to the setting of switch output NPN or PNP
specification changeover.
Moves to the setting of switch output. N.O. or N.C.
specification changeover.
Moves to the setting of analogue display inversion.
No.D-※S-OMA1021