<How to operate>
Press the SET or DOWN button in function selection mode to display [F 0].
Setting of switch output NPN or PNP specification changeover
Press the UP or DOWN button to select the switch output specification.
Press the SET button to save the setting.
Setting of switch output. N.O. or N.C. specification changeover
Press the UP or DOWN button to select the switch output specification.
Press the SET button to save the setting.
Setting of analogue display inversion
Press the UP or DOWN button to select whether or not to invert the analogue display.
Press the SET button to save the setting.
Setting of output setting mode
Press the UP or DOWN button to select the output setting mode.
Press the SET button to save the setting.
[F 0] Setup of the switch output specification and setting mode functions completed
Press the SET button.
-40-
Moves to the setting of switch output NPN or PNP
specification changeover.
Setting of N.O. or N.C. output specification
Selection of analogue display inversion
Selection of the output setting mode
Returns to function selection mode.
No.D-※S-OMA1021