SMC Networks D-MH1AD Series Operation Manual page 25

Analogue auto switch and display sensor monitor

Table of Contents

○Mounting an analogue auto switch

•Full-stroke detectable actuator

With a full-stroke detectable actuator, by mounting the analogue ASW at the recommended position, the

position can be determined throughout the entire stroke.

•Other actuators

Adjust the analogue ASW position so that the point that needs to be detected (workpiece gripping position,

etc.) will be close to the centre (approximately 3 V output) of the determinable range.

-24-

No.D-※S-OMA1021

Table of Contents

D-mh1b series