F97 Copy Function Selection - SMC Networks D-MH1AD Series Operation Manual

■[F97] Copy function selection
The set values can be copied. When the output specification is the same, this function becomes available.
The set value can be copied by up to 10 units simultaneously.
<Connection>
Turn off the power before connecting monitors.
Connect the FUNC terminal of the copy from sensor monitor and the copy to sensor monitor and turn the
power ON.
The copy from sensor monitor refers to the sensor monitor at the copy source.
The copy to sensor monitor refers to the sensor monitor at the copy destination.
<How to operate>
Press the UP or DOWN button in function selection mode to display [F97] on the sensor
monitor to be copied.
Copy function selection
Press the UP or DOWN button to select the copy function.
[oFF] When (Not used) is selected
Press the SET button to save the
setting.
Returns to function selection mode.
Press the SET button.
-54-
Moves to the selection of copy function.
[on] When (Used) or
[onL] (Used) is selected
Press the SET button to save
the setting.
Move to copy ready status.
No.D-※S-OMA1021