Placing Originals - Ricoh Type 480 Scanner Reference

Placing Originals

To correctly display the top/bottom orientation of the scanned original on a cli-
ent computer, the placement of the original and the settings made on the control
panel and scanner driver must match.
There are 4 orientations for placing the original. See the table below.
Note
❒ Normally, an original is
used to make original orientation easy to understand. If the actual shape of
the original is different, the combination of original orientation and the orien-
tation specified on the control panel or scanner driver does not change.
An original to be scanned
When scanning using
the e-mail function, the
Speci-
Scan to Folder func-
fy the
tion, the Store function,
load-
or the delivery scanner
ing
function
orien-
(Specified on the con-
tation
trol panel screen)
of the
origi- When scanning using
the TWAIN scanner
nal.
function
(Specified in the Scan-
ner Control dialog box)
Place the original.
The original displayed on a
computer
*1
When using the machine as a network TWAIN scanner, this is the standard orienta-
tion for the TWAIN Driver. Normally, set the original this way.
or , but in the table below, a square original is
In the [Rotate In the [Rotate
Image:] menu Image:] menu
in the [Quali- in the [Quali-
ty] group, se- ty] group, se-
lect [OFF] lect [Right 90
deg.]
Load the Load the
original top- original with
*1 its top edge
edge first.
touching the
left side of the
exposure
glass.
Placing Originals
In the [Rotate In the [Rotate
Image:] menu Image:] menu
in the [Quali- in the [Quali-
ty] group, se- ty] group, se-
lect [Left 90 lect [180 deg.]
deg.]
Load the Load the
original with original bot-
its top edge tom-edge
touching the first.
right side of
the exposure
glass.
10
109