Table of Contents
Advertisement
Part 2
Setup Mode
Understanding Setup Windows
Setup mode uses the following types of windows:
•
The main window provides access to Setup mode windows.
Although it always appears, you cannot return to it unless you
first close all Setup mode windows.
•
Setup mode lets you change frequently-used settings in
,
Async Ports
Call Defaults
,
, and
IP
IPX
LAT
selecting an option from the
window. When you complete the window's fields and press
, your changes take effect. You can then choose
Apply
another
Setup
main window.
•
A
Confirmation
rather than
Close
your changes will not take effect if you continue the closing
process.
•
A
Reset Parameters
needs to reset Annexes or ports for your changes to take effect.
This window appears only when you select
from the main window's pull-down menu.
•
windows appear when you press
Help
do for all Annex Manager modes and commands. In addition,
the Setup mode provides a single line at the bottom of each
window that gives you a brief summary for each field. A short
message appears automatically as you move the mouse pointer.
The
,
Reset Parameters
Warning
Manager windows. For more information about these windows, refer to
Chapter 3.
,
,
Channels
PRI Line
windows. You can display a window by
field that appears in each
Setup
field option or press
window appears if you change settings and press
. This window informs you that
Apply
window informs you that Annex Manager
, and
windows are the same for all Annex
Help
Annex Manager User Guide
Chapter 5
Setup Mode Basics
General
,
,
Security
AppleTalk
to return to the
Close
Confirm Auto Reset
or
, as they
F1
Help
,
,
5-3
Advertisement
Table of Contents
