Table of Contents
Advertisement
Chapter 4
Using the Main Window
Annex Manager User Guide
4-20
Understanding the SNMP Information Window
Format
The
window uses text fields, check buttons, and push
SNMP Information
buttons. You can update information that appears in the text fields for one
or more Annexes or you can change Annex Manager's default values.
Annex Manager saves the values you change using
for an active session only. When you exit Annex
Information
Manager, the original
are reinstated.
Using Text Fields
uses the following text fields:
SNMP Information
•
specifies the length of time in seconds that Annex
Timeout
Manager waits for a response. You can enter a number of
seconds here. If you leave this field blank,
uses Annex Manager's five second default.
•
controls the number of times that Annex Manager tries
Retries
to reach an Annex or other device on the network. You can
enter a number here. If you leave this field blank, the command
uses Annex Manager's default of 0 (zero) retries.
•
Community String
uses to communicate with Annexes. You can enter a new string
here. If you do not complete this field, Annex Manager uses
, which is the default community string.
public
The
SNMP Information
values for these fields. To display current Annex values or Annex
Manager's default values, you must use
Part 1
, and
Timeout, Retries
specifies the SNMP password Annex Manager
command's initial display does not include
Annex Manager Basics
SNMP
values
Community String
SNMP Information
Show Default
or
Show Annex
.
Advertisement
Table of Contents
