Reset And Initialization (Initialize Menu) - Sony DVS-9000 User Manual

To save the Initial Status settings
1
2
Setting automatic loading of register data at power on (autoload
function)
To have specified data read in at power on, in the System >Start Up menu,
press [Power On File Load], turning it on.
This enables the autoload function.
When the autoload function is enabled, a directory "PWON_LD" appears in
the corresponding File menu.
About saving data which can be loaded by the autoload function, see "Saving
Files Recalled by Autoload" (page 455).

Reset and Initialization (Initialize Menu)

To carry out a reset or memory initialization for a device, use the System
>Initialize menu.
To display the Initialize menu
In the Engineering Setup menu, select VF1 'System' and HF5 'Initialize.'
The status area shows the current start-up mode settings.
280
Setup for the Whole System
This saves the setup settings for the selected devices in non-volatile
memory within the respective devices.
For details about the settings which will be saved, see"Data Saved by
[Setup Define] and [Initial Status Define]" (page 600).
After selecting the devices to which the settings apply to, in the System
>Start Up menu, press [Init Status Define].
A confirmation message appears.
Press [Yes].
This saves the initial status settings other than the "setup" settings for the
selected devices in non-volatile memory within the respective devices.
For details about the settings which will be saved, see "Data Saved by
[Setup Define] and [Initial Status Define]" (page 600).