Sony DVS-9000 User Manual page 74

Name Effect
Twist Twists the image.
Ripple Applies an effect like ripples moving across the image. page 80
Rings Partitions the image into rings that rotate while moving
in the same direction.
Broken Glass Partitions the image like broken glass, with shards
flying outward.
Flying Bar Divides the image into bars which peel off in two blocks
as they move.
Blind Divides the image into bars or wedges, with blocks
rotating like the slats of venetian blinds.
Split Splits the image upper and lower, left and right.
Split Slide Divides the image into bars which slide alternately in
reverse directions.
Mirror Partitions the image vertically and horizontally, creating
an image like a reflection in a mirror.
Multi Mirror Divides the image into originals and reflections, lining
them up vertically and horizontally.
Kaleidoscope Creates an image like a view into a kaleidoscope.
Lens Creates an image like a view through a lens.
Circle Makes a circle with the image.
Panorama Curves the upper and lower edges of the image to
emphasize the sense of perspective.
Page Turn Turns the image like a turning page.
Roll Rolls the image up.
Cylinder Winds the whole image onto a cylinder.
Sphere Winds the whole image onto a sphere.
Explosion Divides the image into fragments which expand as they
fly out.
Swirl Swirls the image.
Melt Melts the image away from a specified part.
Character Extends the edge of the image like a trail.
Trail
Notes
• It is not possible to apply two or more nonlinear effects at the same time.
Turning any nonlinear effect on automatically turns all other nonlinear
effects off.
• The Flex Shadow function cannot be enabled when any of the nonlinear
effects Page Turn, Roll, Cylinder, and Sphere is enabled.
However, the Flex Shadow function is not supported on the MVE-
8000A.
See
page 79
page 84
page 85
page 85
page 86
page 87
page 88
page 89
page 89
page 90
page 91
page 92
page 93
page 93
page 94
page 94
page 95
page 95
page 96
page 97
page 99
DME Special Effect Operations
73