Key Density Settings; Key Source Selection - Sony DVS-9000 User Manual

Key Density Settings

For the selected key, you can separately set the key density.
Setting the key density
1
2
3

Key Source Selection

Select the key signals for use as the front and back of the image.
Selecting the key source signals
Note
When the shaped video setting (see page 125) is on, it is not possible to select
the key source. It is fixed as "Ext Key" as listed in the following.
1
2
128
DME Special Effect Operations
In the DME menu, select VF6 'Input/Output' and HF2 'Video/Key.'
The Video/Key menu appears.
Press [Key Density], turning it on.
This enables the key density function, and you can now use the knobs to
adjust the parameters.
Set the following parameter.
Knob Parameter Adjustment
1 Key Density Key density
In the DME menu, select VF6 'Input/Output' and HF2 'Video/Key.'
The Video/Key menu appears.
In the <Front Key> group or <Back Key> group respectively, press one of
the following, turning it on.
Ext Key: Use the key signal sent from the switcher as the key source.
Int Key: Use the full-size DME internal key signal as the key source.
Lum Key: Use the input video luminance signal as the key source.
Setting values
0.00 to 100.00