Sony DVS-9000 User Manual page 308

Production switcher system

Hide thumbs Also See for DVS-9000:

Table of Contents

Selecting the module to be the reference for device control block

In the <Reference Module> group of the Panel >Config menu, select the

module to be the reference.

Assigning a region to a region selection button in the numeric

keypad control block

A maximum of four regions can be set for a single region selection button in

the numeric keypad control block.

In the Panel >Config menu, press [10 Key Region Assign].

The 10 Key Region Assign menu appears.

The left side of the status area shows region selection buttons; the upper

part of the right side shows a list of regions assigned to region selection

buttons, and the lower part shows a list of assignable regions.

Press the indication of the button for the assignment.

The button you pressed appears in reverse video.

Using any of the following methods, select one of the four regions for the

• Press directly on the list in the upper part of the right side.

• Press the arrow keys to scroll the reverse video cursor in the list in the

upper part of the right side.

• Turn the knob.

Setup Relating to Operations From the Control Panel