Sony DVS-9000 User Manual page 489

5
To delete an event
1
2
3
To modify an event
1
2
3
4
488
Macro Editing Using Menus
• If the memory or register is full.
• The size of the created macro event is larger than the memory or register
space available.
• When multiple events are selected.
• When the number of events has reached 99.
• When not in macro editing mode.
1) While a macro is being executed on the control panel, when macro saving has been
executed, or when the [EXIT] button in the Flexi Pad control block has been pressed
Operate the control panel to save the editing result.
In the macro register listing, press [<Prev] or [>Next] to select the event
you want to delete.
To select all events in the register
Press [All].
Press [Delete].
This deletes the selected event.
Note
If not in macro editing mode
to delete the selected event.
1) While a macro is being executed on the control panel, when macro saving has been
executed, or when the [EXIT] button in the Flexi Pad control block has been pressed
Operate the control panel to save the editing result.
On the control panel, if auto insert mode is on, switch it off.
In the macro register listing, press [<Prev] or [>Next] to select the event
you want to modify.
On the control panel, modify the macro event.
The modified event appears in the macro creation event list.
For more details of the display, see "Macro File Editing Rules" (page
563).
Press [Modify].
1)
1)
, [Delete] is disabled, and it is not possible